Suspended Front Axle Error Codes (APH/CCM) on Case tractors

10001 – Upper lockout solenoid error

10002 – Raise solenoid error

10003 – Lower solenoid error

10004 – Front axle position sensor – threshold higher than set limit

10005 – Front axle position sensor – threshold lower than set limit

10008 – Go down error – suspension unable to return to set point

10009 – Lower lockout solenoid error

10010 – Chassis accelerometer – voltage too low (short circuit to ground / open circuit)

10011 – Chassis accelerometer – voltage too high (short circuit to 5V)

10024 – Front suspension not calibrated