Confirming, calling up, deleting fault codes on Fendt tractors

Confirm fault code

Cancelling a fault code does not remove the fault; it is simply no longer displayed.

Fendt ESC button

Press button repeatedly until no more fault codes are indicated on the display.
NOTE: Each stored fault code must be cleared individually.
The message will be displayed again the next time the tractor is started up.

Call up fault code
Fendt enter button

Press button, the first main menu level appears on the multiple display.

Fendt UP DOWN buttons

Press one of the buttons repeatedly until the symbol (A) flashes.

Fendt caution

Fendt enter button

Press button, the following image appears on the multiple display

Fendt error code

A Number of faults
B Fault currently on display
C Fault code

Fendt UP DOWN buttons

Press one of the buttons and the faults are
displayed one after the other along with
their fault code.

Delete fault code

First call up the fault code, making a note of it if necessary.

Fendt enter button

Press button, the following image appears on the multiple display

Fendt clear fault codes


Press buttons A, B and C simultaneously.
All fault codes in the fault memory of A007 – Instrument panel are deleted.

NOTE: Fault codes are also stored in the
A050 – ECU, basic control unit and, where necessary, in the
A051 – ECU, engine control unit (EDC 7)..
Fault codes can only be deleted from the A050 and A051 using the corresponding diagnostic software.