VTI Control Unit – The VTI controls the GreenStar Display 2100/2600.The GreenStar 2100/2600 Display is exclusively used for machines and systems that conform to the commonly defined implementation level 1 of the International Organization for Standardization (ISO) 11783.
John Deere VTI fault codes / John Deere VTI diagnostic trouble codes
NOTE:This page only indicates the meaning of the fault codes. For complete troubleshooting information, see the technical manuals.
VTi 000158.03 (VTi 158.03)— Control Unit, Supply Voltage (ELX) Too High
The diagnostic trouble code is generated when the supply voltage (ELX) is too high.
VTi 000158.04 (VTi 158.04)— Control Unit, Supply Voltage (ELX) Too Low
The diagnostic trouble code is generated when the supply voltage (ELX) is too low.
VTi 000168.03 (VTi 168.03)— Control Unit, Supply Voltage Too High
The diagnostic trouble code is generated when the supply voltage is too high.
VTi 000168.04 (VTi 168.04)— Control Unit, Supply Voltage Too Low
The diagnostic trouble code is generated when the supply voltage is too low.
VTI 000630.02 (VTI 630.02)— CommandCenter™ Memory Invalid
CommandCenter™ (VTI) memory is invalid or corrupted.
VTi 001386.00 (VTi 1386.00)— Display Unit, Temperature Too High
The diagnostic trouble code is generated when the temperature of the GreenStar display is too high.
VTi 001386.01 (VTi 1386.01)— Display Unit, Temperature Too Low
The diagnostic trouble code is generated when the temperature of the GreenStar display is too low.
VTI 002139.09 (VTI 2139.09)— CSM Messages Missing
CommandCenter™ (VTI) is not receiving any messages from the Cab Switch Module (CSM).
VTi 003597.02 (VTi 3597.02)— Output Voltage of Control Unit (5 volts), out of Valid Range
The diagnostic trouble code is generated when the output voltage (5 volts) of the control unit is out of the valid range for a longer period of time.
VTi 003598.02 (VTi 3598.02)— Output Voltage of Control Unit (1.5 volts), out of Valid Range
The diagnostic trouble code is generated when the output voltage (1.5 volts) of the control unit is out of the valid range for a longer period of time.
VTi 003599.02 (VTi 3599.02)— Output Voltage of Control Unit (3.3 volts), out of Valid Range
The diagnostic trouble code is generated when the output voltage (3.3 volts) of the control unit is out of the valid range for a longer period of time.
VTi 523310.12 — Control Unit Internal Fault
The diagnostic trouble code is generated when there was an error when accessing an internal module (NORFlash).
VTi 523773.03 — Vehicle CAN BUS, CAN BUS Voltage Too High (CAN+)
The diagnostic trouble code is generated when the voltage at the CAN+ lead (vehicle CAN BUS) is too high.
VTi 523773.04 — Vehicle CAN BUS, CAN BUS Voltage Too Low (CAN+)
The diagnostic trouble code is generated when the voltage at the CAN+ lead (vehicle CAN BUS) is too low.
VTi 523774.03 — Vehicle CAN BUS, CAN BUS Voltage Too High (CAN)
The diagnostic trouble code is generated when the voltage at the CANlead (vehicle CAN BUS) is too high.
VTi 523774.04 — Vehicle CAN BUS, CAN BUS Voltage Too Low (CAN)
The diagnostic trouble code is generated when the voltage at the CANlead (vehicle CAN BUS) is too low.
VTi 524050.12 — Control Unit Internal Fault
The diagnostic trouble code is generated when a fault of the internal clock (real time clock) is detected.
VTi 524215.03 — ISOBUS, CAN BUS Voltage Too High (CAN+)
The diagnostic trouble code is generated when the voltage at the CAN+ lead (ISOBUS) is too high.
VTi 524215.04 — ISOBUS, CAN BUS Voltage Too Low (CAN+)
The diagnostic trouble code is generated when the voltage at the CAN+ lead (ISOBUS) is too low.
VTi 524217.03 — ISOBUS, CAN BUS Voltage Too High (CAN)
The diagnostic trouble code is generated when the voltage at the CANlead (ISOBUS) is too high.
VTi 524217.04 — ISOBUS, CAN BUS Voltage Too Low (CAN)
The diagnostic trouble code is generated when the voltage at the CANlead (ISOBUS) is too low.